Shop Pans

Spills can happen anywhere. Killarney Metals is here for you with commercial, industrial, and residential spill containment pans and trays that help with each unique spill containment requirement. While the term "tray" typically refers to a pan with walls of 1" or lower, it is often used interchangeably with "pan". Drip Pan: A welded pan with 4 sides with the intent to contain liquids | Drain Pan: A welded pan with 4 sides and a drain hole with the intent to evacuate liquids through the drain hole | Front Load Pan: A welded pan with 4 sides with a tapered design for a low-profile front edge that allows for open-front washing machines to not have their pull-out drawer be impeded by the front lip of the pan | Leak Pan: A welded pan with 3 side walls with the intent to allow liquids to leak out the front of the pan, serving as a leak alert notification, protecting the floor directly underneath your appliance | Trench Drain Pan: A welded pan with 3 sides using Patented Drain Technology with the intent to evacuate liquids through the pre-welded drain hole

Appliance Pans: Durable Protection from Leaks, Spills, and Water Damage

Leaks don’t always happen where—or when—you expect them. From washing machines and dishwashers to water heaters, ice makers, and HVAC units, even a small drip can cause major damage to floors, cabinetry, and surrounding walls. That’s why our metal containment pans are built to provide long-lasting, reliable protection across every appliance category in your home or facility.

Engineered to Outperform Plastic and Aluminum Trays

Unlike standard plastic or lightweight aluminum pans that warp, crack, or corrode over time, our pans are manufactured from heavy-duty materials built to withstand constant vibration, moisture, and foot traffic. They create a stable base for your appliances and help prevent costly damage caused by unnoticed leaks or spills.

Pans for Every Appliance and Application

We design and manufacture containment pans for:

•

Washing Machines – Including front-load, top-load, and dual-unit setups

•

Dishwashers – Catch under-sink or built-in leaks with open front or trench-style pans

•

Refrigerators & Ice Makers – Protect against condensation or hose failures

•

Water Heaters – Round and wall-mounted options for both tank and tankless units

•

HVAC Systems – Made-to-order pans for attic units, air handlers, and rooftop systems

Whether you need a stock solution for a common appliance or a custom pan built to your exact specs, we’re ready to help. Our front-load washer pans, trench drain systems, and open-front leak trays are designed for smart, efficient installation and long-term peace of mind.

•

Plastic: Inexpensive, but prone to cracking and deterioration over time. Not ideal for long-term or high-value installations.

•

Aluminum: Lightweight, but soft. Can dent or deform under vibration or weight.

•

Rubber: Impact-resistant and quiet. Great for vibration control and heat resistance. Offered exclusively by Killarney Metals molded as round water heater pans.

•

Powder-Coated Steel: Strong and corrosion-resistant with a clean, finished look. Excellent for high-moisture environments.

•

Stainless Steel & Galvanized Steel: Our most rugged options—rust-resistant, long-lasting, and clean in appearance. Ideal for both residential and commercial use.