Pallet Spill Containment
Industrial Secondary Containment Systems
Pallet Racks are a great way to store Drums, Barrels and other equipment that hold liquid contents. A racking system gives storage areas the ability to store vertically as well as horizontally. However, small leaks and spills from palletized contents often occur under and around the storage areas and industrial facilities are increasingly required by state, federal and local regulations to have spill prevention and containment measures in place to remain in compliance. These regulations require facilities to build structures and institute plans of action to prevent spills from occurring.
In the event of a spill, a secondary containment system would prevent potential spills from advancing into employee work areas and creating a hazardous work environment. Killarney Metals manufactures heavy-duty pallet spill containment systems, a wide variety of drip & drain pans, and can create custom secondary containment systems to your exact specifications.
Without adequate secondary containment, environmental contamination may result from improper handling, accidental leaks, spills, and overfills. Some of the common locations where contamination can occur include:
• Floor storm drains
• On-site septic systems
• Cracked floors and improperly sealed containment areas
• Loading and off-loading areas including the dock area and locations having spigots, hose connections, etc.
• Areas where exhaust fans are located (due to condensation and dripping)
Some materials stored in pallet racks that may be potential contaminants include:
• Flammable materials
• Oil or oil based materials
• Salt (Calcium Chloride and Sodium Chloride)
• Hazardous waste
There are many reasons for and benefits from using secondary containment systems with your pallet rack system. You offer your employees a safer work area and reduce your liability risk. In addition, a pallet spill containment system saves you money on clean up and keeps you in compliance with regulatory agencies. Even if your company is not required to have a secondary containment system it is a safety precaution that cannot be ignored.